Sewing A T-Shirt Quilt

0 Comments

Are you interested in sewing a t-shirt quilt?  Old shirts transformed into a t-shirt quilt can be a lifetime of memories.

Here are a few pointers to follow when sewing a t-shirt quilt:

The instructions are based on a 15″ finished square T-shirt block. The quilt will eventually have the same sized quilt block with fabric sashing between the shirt/ blocks and a fabric border.

First, check all your tee shirts to make sure that the designs will fit into a 15″ square. Sizes: all sizes include 1 1/2″ sashing and a 2″ border and are based on a 14 1/2″ finished t-shirt block. If the shirts are smaller than the above mentioned size, sewing shirts together can form one block.

12 shirts will make a throw-size quilt, approx. 48″ x 64″ – 3 across x 4 down.
20 shirts will make a twin size quilt, approx. 64″ x 82″ – 4 across x 5 down
30 shirts will make a full size quilt, approx. 82″ x 96″ – 5 across x 6 down.
36 shirts will make a queen size quilt, approx. 96″ x 96″ – 6 across x 6 down.
42 shirts will make a king size quilt, approx 110″ x 96″ – 7 across x 6 down.

Step 1 – Select Shirts – Make sure the shirts are clean and not stained.

Step 2 – Fusible Interfacing – Each shirt must be backed with non-woven fusible interfacing to prevent it from stretching. Purchase heavyweight fusible Pellon iron-on interfacing. Good quality permits less stretching of the t-shirts. Buy enough for 17″ per shirt. Iron on first before cutting the shirts to the required square size.

Step 3 – Fabric for Sashing/Border/Binding – Sashing strips form a decorative grid between each T-shirt block. Plan on 2″ sashing strips (1 1/2″ when finished) between the blocks, 2 1/2″ strips (2″ when finished) for the border, and additional fabric for the binding.

Step 4 – Cutting Shirts – Separate the front of the shirt from the back. Make sure the shirt is smooth, iron if necessary. You want your shirt side to be larger than 15 inches square – ideally larger than 17 inches to fit the interfacing. After you apply the interfacing you will cut the shirt square to the desired size. (Mentioned in Step 2)

Step 5 – Fusing – Cut interfacing to a 17″ square. Don’t piece the interfacing, it will show through. Position the interfacing with the resin side down on the wrong side of the t-shirt, trying to center the design as much as possible. Follow the manufacturer’s instructions for fusing to the back of each T-shirt. Use a press cloth so you don’t get any glue on your iron. Beware of wrinkles – once cool they won’t come out!

Step 6 – Cutting the Squares – Square up each fused shirt to 15″. Make sure you center the design and lettering – measure twice – cut once! Be aware when cutting the design that a 1/4 seam allowance is needed as you plan your design space.

Step 7 – Arranging – Lay out squares on the floor or on the bed and arrange. Alternate light/dark, busy/not so busy. Make sure the blocks can be read from the desired direction and are all going in the same direction. Pay close attention to repeat pattern and words so that these and and not just colors do not end up in the same row or column.

Step 8 – Completing the Quilt Top – add sashing – Sashing strips are the horizontal and vertical strips between blocks. The horizontal strips should measure 15″ in length x 2″ wide. Cut enough sashing strips to add to all the t-shirts except the bottom row. Sew horizontal strips to the bottom of each block, except the blocks in the bottom row. Sew blocks together to form columns. To keep the quilt straight, use posts at the corners of the block and between the sashing strips. Using a contrasting color makes for a “pop” in this post design.

Step 9 – Sew the sashing strips onto each block, first. Be sure that the first and last block of each row has a sashing strip on each end. Now sew the strips for between the rows of the blocks together adding the posts between the strips. Include one strip for each block. There should be a strip between each row of blocks as well as above and below the blocks to form part of the border. The side border will be made automatically as you complete the rows when you are sewing a t-shirt quilt.sewing a t-shirt quilt

Finish – Layer backing batting and quilt top. Baste or safety pin together. You can either hand quilt or machine quilt the t-shirt quilt.

0 thoughts on “Sewing A T-Shirt Quilt”

  1. handmade baby t-shirt quilt are nice because they include 100% baby cotton flannel

Leave a Reply

Your email address will not be published. Required fields are marked *